Titanium Gr2 is somewhat stronger than Titanium Grade 1 yet similarly erosion safe against most applications. Best quality to weight proportion of any consumption safe material. This evaluation is a standout amongst the most widely recognized Titanium Grades and is utilized for Heat exchangers, condenser tubing and blanching plants in paper industry, seaward oil establishment water channel lines. Can be utilized for parts obliging quality up to 400°F and oxidation imperviousness to 600°F.Titanium Gr 2 titanium demonstrates valuable in compound procedures, since it is profoundly impervious to concoction situations including oxidizing media, soluble media, natural acids and mixes, watery salt arrangements and hot gasses. Its erosion resistance holds up in fluid metals, nitric corrosive, gently diminishing acids and wet chlorine or bromine gas. Grade 2 titanium is likewise used to produce heat exchangers and cryogenic vessel.
Titanium Gr 2 is known as the “workhorse” of the financially unadulterated titanium industry, on account of its differed ease of use and wide accessibility. It imparts a large number of the same qualities as Grade 1 titanium, however it is somewhat stronger. Both are similarly consumption safe.
SPECIFICATONS:
- UNS R50400
- Werkstoff Nr.3.7035
APPLICATIONS OF TITANIUM GRADE 2:
- Structural engineering
- Power era
- Therapeutic industry
- Hydro-carbon preparing
- Marine industry
- Fumes funnel covers
- Airframe skin
- Desalination
- Compound transforming
- Chlorate producing
CHEMICAL PROPERTIES OF TITANIUM GRADE 2:
| Titanium Gr 2 | |
| Ti | 99.2 min |
| C | 0.1 max |
| Fe | 0.3 max |
| H | 0.015 max |
| N | 0.03 max |
| O | 0.25 max |
MECHANICAL PROPERTIES OF TITANIUM GRADE 2:
| Density | 4.5 g/cm3 |
| Melting Point | 1665 °C (3030 °F) |
| Tensile Strength | Psi – 49900 , MPa – 344 |
| Yield Strength (0.2%Offset) | Psi – 39900 , MPa – 275 |
| Elongation | 20 % |